Machinery

1" MOTOR PUMP WITH NOUKI 4-STROKE ENGINE 37 CC BLUE COLOR

Ref. YPS-30

IMPORTANT: Check item availability

Available

View

MOTOBOMBA CAUDAL 2" MOTOR GX-160 SIN ALARMA DE ACEITE

Flow motor pumps

2 "FLOW MOTOR PUMP GX-160 ENGINE

Ref. WP-20AK

Self-priming pump with a Honda GX-160 5.5 HP engine. It has a 2-inch discharge outlet and suction inlet.

Soon

View

MOTOBOMBA PLASTIC 2" MOTOR GX-160 MEDS: 53 X 42 X 46 (h)

Special application motorized pump

Special application pump with a Honda GX-160 5.5 HP engine. It has a 2-inch outlet and suction port. Pump specially designed for liquid transfer when other solutions are not the most suitable (large volumes of liquid to transfer, liquid composition, etc.). The body supporting the pump is made of high-resistance plastic (Polyethylene...

2 "PLASTIC MOTOR PUMP GX-160 MEDS ENGINE: 53 X 42 X 46 (h)

Ref. FTB-50

Available

View

Flow motor pumps

3 "FLOW MOTOR PUMP GX-160 ENGINE

Ref. WP-30AK

Self-priming pump with Honda GX-160 5.5 HP engine. It has a 3-inch outlet and suction inlet.

Available

View

CARRETILLA 4X4, 300 KG , MOTOR LONCIN 6.5 CV

Chain trucks

Motorized 4x4 Dumper, ideal for gardening, agriculture, material transport, and construction work. Its compact dimensions, high load capacity, and maneuverability make it the perfect substitute for the traditional hand wheelbarrow. It features a four-wheel drive transmission with three speeds (plus reverse) and a tilting dump bed with a maximum load...

4X4 TRUCK, 300 KG, 6.5 CV LONCIN ENGINE

Ref. ECR300L

Last units in stock

View

CARRETILLA 4X4, 500 KG , MOTOR ELECTRICO

Chain trucks

4X4 TRUCK, 300 KG, 6.5 CV LONCIN ENGINE

Ref. EBR500E

Available

View

ASTILLADORA VERTICAL ELECTRICA 8 TONELADAS 83 x 93 x 147 CM.120KG DE PESO

Saw/chipper

8 TONS ELECTRIC VERTICAL CHIPPER 83 x 93 x 147 CM

Ref. GTL-8000-230V

Forget about the traditional methods of splitting logs! Get firewood pieces relatively easily and quickly by just pressing a button. Proportional log cuts into two halves with minimal effort.

Available

View

REBORDEADORA 24 MM, MOTOR TU-26, CON DISCO Y CABEZAL

Brushcutters

24 MM TRIMMER, TU-26 MOTOR, WITH DISC AND HEAD

Ref. R-424-M

Available

View

Brushcutters

Professional brush cutter Nouki XS-800 with BLUEBIRD N-61E engine and 28 mm bar. The engine features electronic ignition and a diaphragm carburetor that facilitates easy starting and provides a constant idle even in cold conditions. The bar has an anti-vibration system in the clutch bell support that significantly reduces operator fatigue. The drive shaft...

28 MM BRUSH CUTTER WITH BLUE BIRD 58 CC

Ref. XS-800-N61E

Soon

View

419086 CORTACESPED HELICOIDAL OLYMPIC 500 GOLF MOTOR HONDA GX-160

Helical mower

Cylinder lawn mower Masport Olympic 500 GOLF with Honda GX-160 engine of 5.5 HP The Olympic series is fully equipped and ready for professional-level performance. Its most relevant features include: Padded and ergonomic handles for more comfortable handling. Independent levers for traction and cutting. Centralized height adjustment system. Front...

419086 HELICOIDAL MOWER ENGINE HONDA GX-160

Ref. OLYMPIC500GOLF

Last units in stock

View

Lawn tractor

552957 LAWN TRACTOR MASPORT S22 102 HD, 22 HP

Ref. S-220-102

Soon

View

Wood chippers

929304 EURO-H PALM SCREEN

Ref. MP-929304

Optional accessory for shredding palm leaves. IMPORTANT: To use this sieve, you need to disassemble the one installed in the original machine (perforated sieve).

Available

View

ACCESORIO CEPILLO PARA DESBROZADORA RUEDAS

Wheel brush cutter

ACCESORIO CEPILLO PARA DESBROZADORA RUEDAS

Ref. DR-52-C

Available

View

Wheel brush cutter

ACCESORIO MOTOAZADA PARA DESBROZADORA RUEDAS

Ref. DR-52-M

Soon

View

Wheel brush cutter

ALUMINUM PROTECTOR WITH BEARING

Ref. DR-005-P

The head protector is an alternative to the original version installed as standard on the machine. Being made of aluminum makes it more resistant to wear and abrasion..

Available

View

DESBROZADORA ANTIVIB CON KAWASAKI TJ-53E

Brushcutters

ANTI-VIBRATION BRUSH CUTTER WITH KAWASAKI TJ-53E

Ref. XP-280-TJ53

Soon

View

Brushcutters

Accessory that enables the generator to start and stop in the event of a power outage. Installation of this device requires specialized tools and knowledge of electricity and electronics. Installing this accessory requires knowledge of electricity and electronics. We advise taking necessary precautions when installing it.

ANTI-VIBRATION BRUSH CUTTER WITH TB-50 ENGINE

Ref. XP-280-TB50

Soon

View

Augers

AUGER ENGINE HONDA GX50

Ref. AUG-500-GX50

Motorized auger with Honda GX-50 engine for augers with a 20 mm shaft. It features a gearbox (35:1) driven by a centrifugal clutch and a safety control. The price does not include drills.

Soon

View

CUADRO AUTOMATICO FALLO DE RED PARA GRUPOS MONOFASICOS SCD-9000

Generators

VG ENERGY

AUTOMATIC NETWORK FAULT PANEL FOR SINGLE-PHASE GROUPS SCD-9000

Ref. FR-ATS

Soon

View

Blowers

The most powerful backpack blower at the best price. The blower comes with a backrest and padded straps for greater comfort during long working days. Recommended especially for use in the olive campaign.

BACK BLOWER 75.6 CC

Ref. VGB-8000

Available

View

Wheel brush cutter

HONDA

BARBIERI HAMMER BRUSH CUTTER WITH HONDA GX-200

Ref. G-660-GP200

IMPORTANT: Check item availability

Available

View

Brushcutters

BARRA DESBROZADOR BC-800, TUBO 28 MM , SIN MOTOR

Ref. BC-800

Available

View

BARREDORA BATERIA DE CESPED ARTIFICIAL, INCLUYE 2 BATERIAS 4 AH

News

BATTERY-OPERATED ARTIFICIAL GRASS SWEEPER, INCLUDES 2 BATTERIES 4 AH

Ref. BCE-400

Available

View

BATERIA LITIO ION 5.2 AH, 21V, MOTOSIERRA MBE-6, TIPO "QY"

Chainsaws

BATTERY 5.2 AH CHAINSAW MBE-6

Ref. MBE-6-5

Battery for MBE-6 pruning chainsaw.

Available

View

MOTOSIERRA BATERIA CON ESPADA DE 4", 2 BATERIAS 1.5 AH, Y CARGADOR VERSION 2022

Chainsaws

BATTERY CHAINSAW WITH 4 "SWORD, 2 BATTERIES 2.5 AH, AND CHARGER

Ref. MBE-2 2022

Soon

View

MOTOSIERRA BATERIA CON ESPADA DE 6", 2 BATERIAS 2 AH Y CARGADOR

Chainsaws

BATTERY CHAINSAW WITH 6" BAR, 2 BATTERIES 2 AH AND CHARGER

Ref. MBE-5

Available

View

MOTOSIERRA BATERIA CON ESPADA DE 7", 2 BATERIAS 5.2 AH Y CARGADOR

Chainsaws

The pruning chainsaw model MBE-6 is the ideal companion for pruning tasks. Forget about the manual saw and say goodbye to manual work that will only bring you fatigue and unnecessary injuries! Due to its mechanical features, it is well-suited for more professional use than its smaller sister, MBE-2. Its ergonomic design combined with its lightweight...

BATTERY CHAINSAW WITH 8 "SWORD, 2 BATTERIES 5.2 AH AND CHARGER

Ref. MBE-6

Available

View

PERTIGA EXTENSIBLE DE 2.2 -3.3 MTS PARA MOTOSIERRA BATERIA MB-6

Chainsaws

BATTERY CHAINSAW WITH 8 "SWORD, 2 BATTERIES 5.2 AH AND CHARGER

Ref. MBE-6-PE

Pole for pruning chainsaw MBE-6 (2021 Version). Work with total safety. Reach higher with this accessory and access the most resistant branches without unnecessary effort or risks.

Available

View

TIJERA DE PODA BATERIA, DIAM 35 MM , INCLUYE 2 BATERIAS 2 AH

Chainsaws

The pruning shear TBE-35 is a high-performance tool for pruning fruit trees, vines, and plants. It is an easy-to-use tool and comfortable to handle due to its ergonomic rubber handle. The item comes presented in a kit that includes as standard: two batteries, a charger, instruction manual, and basic tool for shear maintenance. In its electronics, it...

BATTERY PRUNING SHEARS, DIAM 35 MM, INCLUDES 2 2 AH BATTERIES

Ref. TBE-35

Available

View

BIOTRITURADORA BB120L CON REMOLQUE HOMOLOGADO

Wood chippers

BB120L WINE SHREDDER WITH APPROVED TRAILER

Ref. BB120L-REM

IMPORTANT: Check item availability

Available

View

Wood chippers

BIOTRITURADORA GTS-900H CON MOTOR HONDA GX-270

Ref. MSGTS903H

Soon

View

Wood chippers

BIOTRITURADORA GTS-1300H CON MOTOR HONDA GX-390

Ref. MSGTS1305H

Soon

View

BIOTRITURADORA GTS 900 HC GTS 900G, GTS-900HC, MOTOR GTM 9 CV

Wood chippers

IMPORTANT: Check item availability The GTS-900HC model will allow you to shred all types of pruning residues. Its system with 2 blades and 1 counterblade can shred any type of branches or shrubs. It includes a pair of wheels that make transportation easy. The machine's chassis incorporates a mushroom-type emergency stop button as a safety feature.

BIOTRITURER GTS 900 HC GTS 900G, GTS-900HC, GTM 9 CV ENGINE

Ref. GTS900HC

Available

View

DESBROZADORA ARRASTRADA CUCHILLA BRIGGS 20 HP

Wheel brush cutter

BRIGGS 20 HP BLADE TRAILED BRUSH CUTTER

Ref. TB25144BENC

The TB25144BENC brush cutter is a towed professional-grade machine that offers high reliability for clearing and cleaning all types of terrain. The most notable features of this machine include: Briggs Stratton 20 HP engine with electric start. Electro-clutch system. 2 floating blades.

Soon

View

Brushcutters

Professional brush cutter NK-320-K with Kawasaki TJ-53E engine and 32 mm shaft. The engine features electronic ignition and a membrane carburetor that facilitates easy starting and provides a constant idle even in cold conditions. The shaft has an anti-vibration system in the clutch bell support, significantly reducing operator fatigue. The drive shaft...

BRUSH CUTTER, KAWASAKI TJ-53 ENGINE

Ref. NK-320-K

Soon

View

DESBROZADORA MARTILLOS 870 MM, MOTOR GX-390, TRACCION CADENAS

Wheel brush cutter

BRUSH CUTTER HAMMERS 870 MM, GX-390 ENGINE, CHAIN DRIVE

Ref. TT-886HD

Nouki TT-886 HD brush cutter for domestic and professional use. Designed to offer the best performance. Its high performance, versatility and robustness will not leave you indifferent.

Available

View

Brushcutters

Professional brush cutter Nouki XS-800 with Honda GX-35 engine and 28 mm bar. The engine features electronic ignition and a membrane carburetor that facilitates easy starting and provides a constant idle even in cold conditions. The bar has an anti-vibration system in the clutch bell support, significantly reducing operator fatigue. The driveshaft is...

BRUSH CUTTER WITH HONDA GX-35 ENGINE

Ref. XS-800-GX35

Soon

View

DESBROZADORA CON MOTOR NOUKI 51.7 CC, 28 MM

Brushcutters

Brush Cutter Nouki XS-800 with Nouki BC-520A engine and 28 mm bar. The engine features electronic ignition and a membrane carburetor that facilitates easy starting and provides a constant idle even in cold conditions. The bar has an anti-vibration system in the clutch bell support that significantly reduces operator fatigue. The driveshaft is made of...

BRUSH CUTTER WITH NOUKI MOTOR 51.7 CC, 28 MM

Ref. XS-800-BC

Soon

View

CARGADOR AC 100-240V - DC 12V 2.0A PARA BATERIAS DE MAKITA

Chainsaws

CARGADOR AC 100-240V - DC 12V 2.0A PARA BATERIAS DE MAKITA

Ref. 23-1297

Soon

View

CARGADOR DE BATERIAS DC 12V 2.0A CON CONECTOR PARA ENCENDEDOR DE COCHE

Chainsaws

CARGADOR DE BATERIAS DC 12V 2.0A CON CONECTOR PARA ENCENDEDOR DE COCHE

Ref. 23-1296

Soon

View

CARGADOR DOBLE AC 100-240V - DC 12V 2.0A PARA BATERIAS DE MAKITA

Chainsaws

CARGADOR DOBLE AC 100-240V - DC 12V 2.0A PARA BATERIAS DE MAKITA

Ref. 23-1295

Soon

View

CARRETILLA TRANSPORTADORA 350 KG. MOTOR HONDA GP-160 4 MARCHAS (3 ADELANTE + 1 ATRAS)

Chain trucks

Tracked mini dumper with 14 HP Yamaha MX-400 engine, ideal for gardening, agriculture, material transport, and construction work. Its dimensions, high load capacity, and maneuverability make it the perfect replacement for the traditional hand wheelbarrow. It features a transmission box with a gradual speed regulator and a tilting dump with a maximum...

CARRETILLA TRANSPORTADORA 350 KG. 4 MARCHAS (3 ADELANTE + 1 ATRAS) CON MOTOR HONDA GP-160

Ref. TR-340

Last units in stock

View

Chain trucks

CHAIN ??TRUCK 800 KG WITH YAMAHA MX-400

Ref. TP-580-1

Front blade accessory for the TP-580 tracked mini dumper.

Soon

View

ELEVADOR PLATAFORMA CON BASCULANTE HIDRAUL. 600 KG, 1200-1400 MM

Chain trucks

CHAIN ??TRUCK 800 KG WITH YAMAHA MX-400

Ref. TP-580-2

Accessory lift with dump for TP-580. Installation of this accessory requires knowledge of hydraulics.

Soon

View

CARRETILLA DE CADENAS 800 KG CON YAMAHA MX-400

Chain trucks

CHAIN ??TRUCK 800 KG WITH YAMAHA MX-400

Ref. TP-580-MX400

Soon

View

Hoes

CHAIN ??WINDING MACHINE, 170 CC, WITH 3 CULTIVATOR ACCESSORIES

Ref. KM-41158

Soon

View

MOTOSIERRA 25CC (2T) 0,8KW CON ESPADA CARVING 10" (25CM) 1/4", 0.050

Chainsaws

CHAINSAW 25CC (2T) 0.8KW WITH CARVING BAR 10" (25CM) 1/4", 0.050 60 LINKS

Ref. MBG-2510

Available

View

MOTOSIERRA 25CC (2T) 0,9KW CON ESPADA CARVING 12" ,1/4", 0.43, 64 ESLAB.

Chainsaws

CHAINSAW 25CC (2T) 0.9KW WITH 12" CARVING BAR, 1/4", 0.43, 64 LINKS.

Ref. MBG-2512

Available

View

Chainsaws

Vacuum cleaner COLLECTOR 175 designed for the collection of all types of urban waste (broken glass, cigarette butts, plastic bags, soda cans, papers, etc.) It incorporates a Husqvarna motor from the E-Tech range of 38 cc with a low noise level. The throttle control includes a power selector. Waste storage tank with an interior filter that prevents...

CHAINSAW CHARGER MBE-5

Ref. MBE-5-C

Soon

View

Saw/chipper

CHIPPER 22 TONS

Ref. FOREST-220

Available

View

Vacuum cleaners

COLLECTOR

COLLECTOR VACUUM CLEANER 175

Ref. COLLECTOR 175

Last units in stock

View

ESTACADORA DE POSTES CON 3 ADAPTADORES (20-45MM 46-60MM 60-78MM) CON MOTOR HONDA GX-35 - MODELO 2024

Augers

COLUMN SUBTERRANEAN WITH 3 ADAPTERS (20-45MM 46-60MM 60-78MM) WITH HONDA GX-35 ENGINE -...

Ref. CLE-GX36

Available

View

Back battery harvester

The engine is located in the operating head and is completely isolated from the exterior, thus preventing dirt from entering the reduction box that could reduce the performance of the electric motor. The rod comb moves laterally to ensure optimal operation. The telescopic shaft of the pole has a rotation locking system, providing a longer lifespan and...

CORDED HARVESTER, 36 V - 650 W

Ref. CORMORAN-V36

Available

View

Back battery harvester

CORMORAN STAND VARERATOR

Ref. OLIVAREX-STAND

Available

View

CORTACESPED ACERO AUTOPROP. 51 CM, KAWASAKI FJ-180V

Mower

CORTACESPED ACERO AUTOPROP. 51 CM, KAWASAKI FJ-180V

Ref. MW-51KWS

Available

View

CORTACESPED ACERO AUTOPROP. 51 CM, LONCIN 196 CC

Mower

CORTACESPED ACERO AUTOPROP. 51 CM, LONCIN 196 CC

Ref. MW-51LCS

Available

View

CORTACESPED ALUM AUTOPROP. 53 CM, BRIGGS DOV750EX

Mower

CORTACESPED ALUM AUTOPROP. 53 CM, BRIGGS DOV750EX

Ref. MW-53BSA

Available

View

CORTACESPED ALUM AUTOPROP. 53 CM, HONDA GXV-160

Mower

CORTACESPED ALUM AUTOPROP. 53 CM, HONDA GXV-160

Ref. MW-53HA

Available

View

DESBROZADORA MARTILLOS 500 MM, CON MOTOR GP-160

Wheel brush cutter

DESBROZADORA MARTILLOS 500 MM, CON MOTOR GP-160

Ref. TT-560

Available

View

Brushcutters

DESBROZADOR CON MOTOR BC-520

Ref. BC-800-520

Soon

View

Brushcutters

DESBROZADOR CON MOTOR KAWASAKI TJ-45

Ref. BC-800-TJ45

Available

View

Brushcutters

DESBROZADOR CON MOTOR NOUKI NKX35

Ref. BC-800-NKX35

Available

View

Dirty water pump

Japanese pump with Honda GX-160 5.5 HP engine with oil level sensor. It has a 2-inch discharge and suction port. Quick access to the inside of the pump body thanks to its two lateral butterfly closures. Turbine made of high-strength steel with chrome alloy. Thick cast iron cover. Mechanical seal made of silicon carbide, providing high resistance to...

DIRTY WATER MOTOR PUMP HONDA GX-160

Ref. WP-200HT

Soon

View

Dirty water pump

Japanese pump with Honda GX-240 8 HP engine with oil level sensor. It has a 3-inch outlet and suction port. Quick access to the inside of the pump body thanks to its two side butterfly locks. Turbine made of high-strength steel with chrome alloy. Thick cast iron cover. Mechanical seal made of silicon carbide that provides high resistance to abrasion....

DIRTY WATER MOTOR PUMP HONDA GX-240

Ref. WP-300HT

Available

View

ASTILLADORA ELECTRICA 3 POSICIONES 15 TONELADAS NOUKI

Saw/chipper

ELECTRIC SPLITTER 3 POSITIONS 15 TONS NOUKI

Ref. FOREST-150E

Available

View

ASTILLADORA CON REMOLQUE HOMOLG. FOREST-360

Saw/chipper

ELECTRIC VERTICAL CHIPPER 7 TONS 58x40x102

Ref. FOREST-360-REM

IMPORTANT: Check item availability

Available

View

ASTILLADORA 3 POSICIONES 15 TONELADAS NOUKI 7 PS / 4000 RPM

Saw/chipper

ELECTRIC VERTICAL CHIPPER 7 TONS 58x40x102

Ref. FOREST-150

Available

View

Wheel brush cutter

FRONT SKATE- CUTTING HEIGHT REDUCTION

Ref. DR-002-T

Optional slider that comes pre-installed on the machine. The function of the skate is to reduce the cutting height by 5 cm compared to the one that comes pre-installed on the machine.

Soon

View

HIDROLIMPIADORA GASOLINA 6.5 CV , BOMBA 200 BAR Y 9 L/MIN

Pressure washers

FUEL PRESSURE WASHER 6.5 HP, 200 BAR PUMP AND 9.2 L/MIN

Ref. NPW-185

NPW-185 pressure washer with a 6.5 HP Nouki engine and a 200 bar / 9 l/min pump. The motor-pump tandem is mounted on a two-wheeled cart for easy transport.

Available

View

HIDROLIMPIADORA GASOLINA 15 CV , BOMBA 275 BAR Y 15 L/MIN

Pressure washers

FUEL PRESSURE WASHER 15 HP, 275 BAR PUMP AND 15 L/MIN

Ref. NPW-250

NPW-250 pressure washer with a 15 HP Nouki engine and a 275 bar / 15 l/min pump. The motor-pump tandem is mounted on a two-wheeled cart for easy transport.

Available

View

TRITURADORA GTS1300 MOTOR 13 CV , GTS-1300HC

Wood chippers

IMPORTANT: Check item availability The GTS-1300-HC model will allow you to shred all kinds of pruning residues. Its system with 2 blades and 1 counterblade can shred any type of branches or shrubs, and even palm leaves. It incorporates a pair of wheels that facilitate its transport. The machine's chassis includes a mushroom-type emergency stop button...

GRINDER GTS1300 13 CV ENGINE, GTS-1300HC

Ref. GTS1300HC

Available

View

BIOTRITURADORA ARRASTRADA GTS-1300 CON MOTOR HONDA

Wood chippers

IMPORTANT: Check item availability The GTS1300REM, in terms of operation, has the same characteristics as the GTS1300H or GTS1300HC models. The particularity of this machine is that it is installed on a trailer to be towed by a vehicle. The machine is approved for road circulation (maximum speed 80 km/h). The ideal complement for garden maintenance...

GRINDER GTS 1300 HONDA WITH TRAILER

Ref. GTS1300REM

Available

View

Wood chippers

La solucion definitiva para trabajar con su tractor! Esta trituradora tiene un diseño compacto y una gran capacidad de trabajo. Tritura hasta un diámetro máximo de 14 cm. Es compatible con un rango de tractores de 25 a 50 HP. Si su tractor está entre ese rango de potencia no tendrá ningun problema para poder hacer uso de este accesorio Dispone de...

GRINDER TAKES POWER 10 CM, GTS-1300T

Ref. GTS1800T

Soon

View

Wood chippers

The GTS-600HC model will allow you to shred all types of pruning waste. Its system with 2 blades and 1 counterblade can shred any type of branches or bushes. It incorporates a pair of wheels that facilitate its transport. The machine's chassis includes a mushroom-type emergency stop button as a safety feature.

GRINDER WITH GTM MOTOR

Ref. GTS-600HC

Available

View

Wood chippers

IMPORTANT: Check item availability The GTS-1300-H model incorporates a powerful 13 HP Honda GX-390 engine that will allow it to shred all types of pruning residues. Its system of 2 blades and 1 counterblade can shred any type of branches or shrubs, and even palm leaves. It includes a pair of wheels that facilitate its transportation. The machine's...

GTS-1300H HONDA GX-390 BIOTCRUSHER

Ref. GTS1300H

Available

View

BIOTRITURADORA GTS 900 HONDA GX-270, GTS-900H

Wood chippers

IMPORTANT: Check item availability The GTS-900H model will allow you to shred all kinds of pruning residues. Its system of 2 blades and 1 counter-blade, powered by a 9 HP Honda GX-270 engine, can shred any type of branches or shrubs. It incorporates a pair of wheels that facilitate its transport. The machine's chassis includes a mushroom-type emergency...

GTS 900 BIOT GRINDER HONDA GX-270, GTS-900H

Ref. GTS900H

Available

View

BIOTRITURADORA GTS 900 HONDA GX-390, GTS-900H390

Wood chippers

GTS 900 BIOT GRINDER HONDA GX-270, GTS-900H

Ref. GTS900H390

IMPORTANT: Check item availability

Available

View

Flow motor pumps

GX-35, 1.5 "FLOW MOTOR PUMP

Ref. WP-40H

Self-priming pump with Honda GX-35 1.8 HP engine. It has a 1.5-inch outlet and suction port. Includes plastic fittings to connect hoses and a bottom filter.

Available

View

Wood chippers

GX-390, GTS-1800R SHREDDER

Ref. GTS1800R

Soon

View

Back battery harvester

CORMORAN Harvester with built-in lithium backpack battery. The motor is located in the operation head and is completely insulated from the outside, preventing dirt from entering the gearbox, which could reduce the performance of the electric motor. The rod comb moves laterally to ensure optimal work. The telescopic shaft of the pole has a rotation lock...

HARVESTER WITH BACKPACK 36 V - 650 W

Ref. CORMORAN-V36BP

Soon

View

VAREADOR CON CABLE , 12 V - 600 W , 1 VELOCIDAD 1.70-2.6 MTS

Back battery harvester

CORMORAN Olive Harvester for 12V battery. The motor is located in the operation head and is completely isolated from the exterior, thus preventing dirt from entering the gearbox that could reduce the performance of the electric motor. The rod comb moves laterally to ensure optimal work. The telescopic shaft of the pole has a rotation locking system,...

HARVESTER WITH CABLE, 12 V - 600 W, 1 SPEED 1.70-2.6 MTS

Ref. CORMORAN-V12

Available

View

CORTASETOS MITSUBISHI TLE-24 , 600 MM DOBLE CORTE ( E8F600 )

Hedge trimmer

Hedge trimmer with Mitsubishi TLE-24 engine and Japanese Ochiai transmission. It incorporates an internal transmission system that provides much smoother operation, significantly reducing the number of internal breakages in case of blade blockage. The blades are made of chrome steel, sharpened and polished on all three cutting surfaces to achieve a...

HEDGE TRIMMER MITSUBISHI TLE-24, 600 MM DOUBLE CUT (E8F600)

Ref. HTO-601R-TLE24

Available

View

CORTASETOS MITSUBISHI TLE-24 , 750 MM DOBLE CORTE

Hedge trimmer

HEDGE TRIMMER MITSUBISHI TLE-24, 750 MM DOUBLE CUT

Ref. HTO-751R-TLE24

Available

View

HIDROLIMPIADORA NOUKI HS-701, 185 BAR Y 8 L/MIN

Pressure washers

HONDA GP-200 PRESSURE CLEANER, 185 BAR AND 8 L / MIN

Ref. HSPW-185

IMPORTANT: Check item availability

Available

View

HIDROLIMPIADORA HONDA GP-200, 185 BAR Y 8 L/MIN

Pressure washers

IMPORTANT: Check item availability Pressure washer with Honda GP-200 6.5 HP engine. Mounted on a steel frame with wheels that facilitates the mobility and transportation of the unit. Equipped with a Annovi Reverberi pump with a pressure of 185 bar as standard. Includes a lance and a 10-meter hose as standard.

HONDA GP-200 PRESSURE CLEANER, 185 BAR AND 8 L / MIN

Ref. HPW-185

Available

View

Blowers

ATOM

HONDA GX-25 HAND BLOWER

Ref. AT-855

The most powerful blower on the market equipped with a Honda GX-25 engine. The "Smartfan" turbine system transforms a large volume and power of air with minimal engine energy. It features an anti-vibration system in the machine's handle. Blower designed for professional use.

Available

View

BIOTRITURADORA AUTOPROPULSADA HONDA GX-630

Wood chippers

The first professional machine on the market with reduced dimensions. Thanks to its 72 cm width, the machine can enter through any standard-sized door. It is designed for the shredding of all types of pruning residues: large logs, shrubs, branches, palm leaves, etc., regardless of whether they are dry or tender. It is easily transportable due to its...

HONDA GX-630 SELF-PROPELLED BIOTCRUSHER

Ref. GTS-1800WD

Soon

View

BIOTRITURADORA MOTOR HONDA GX390 CARRETILLA ORUGAS

Wood chippers

IMPORTANT: Check item availability The GTS 1300TP, in terms of operation, shares the same characteristics as the GTS1300H or GTS1300HC models. The particularity of this machine is that it is installed on a rubber-tracked carriage, allowing it to move on difficult terrain. It is a machine designed and built to navigate through areas where access for...

HONDA GX390 TRACKED TRUCK TRUCK BIO CRUSHER

Ref. GTS 1300TP

Available

View

Mower

KAAZ

KAAZ PROFESSIONAL LAWNMOWER- BIG WHEEL

Ref. LM5360HXAPRO

Lawnmower Kaaz LM-5360-HXA-PRO with a Honda GXV-160 engine of 5.5 HP, mounted on an aluminum chassis. It features a 75-liter collection bag and a 2-speed gearbox with a cardan transmission.

Last units in stock

View

MOTOBOMBA FLOTANTE MOTOR KAWASAKI FJ-180

Special application motorized pump

Floating water pump WP-150HT with Kawasaki FJ-180 engine of 6 HP. The body supporting the pump is made of high-resistance plastic. Intended for applications such as: Extraction of water from wells. Flooding of basements and underground garages. Transfer between liquid tanks. And more.

KAWASAKI FJ-180 FLOATING MOTOR PUMP

Ref. WP-150HT

Soon

View

Brushcutters

Professional brush cutter Nouki XS-800 with Kawasaki TJ-45E engine and 28 mm bar. The engine features electronic ignition and a membrane carburetor, making starting easy and providing a consistent idle even in cold conditions. The bar is equipped with an anti-vibration system in the clutch bell support, significantly reducing operator fatigue. The...

KAWASAKI TJ-45 MOTOR BRUSH CUTTER

Ref. XS-800-TJ45E

Soon

View

Augers

IMPORTANT: Check item availability Motorized auger with Kawasaki TJ-53 engine for augers with a 20 mm shaft. It features a gearbox (35:1) driven by a centrifugal clutch and a safety control. The price does not include drills.

KAWASAKI TJ-53 ENGINE CHOKE

Ref. AUG-500-TJ53

Soon

View

Brushcutters

Professional brush cutter Nouki XS-800 with Kawasaki TJ-53E engine and 28mm bar. The engine features electronic ignition and a membrane carburetor, making starting easier and providing a consistent idle even in cold conditions. The bar has an anti-vibration system in the clutch bell support, significantly reducing operator fatigue. The driveshaft is...

KAWASAKI TJ-53 MOTOR BRUSH CUTTER

Ref. XS-800-TJ53

Soon

View

Brushcutters

KAWASAKI TJ-53 MOTOR BRUSH CUTTER

Ref. BC-800-TJ53

Soon

View

Brushcutters

Professional backpack brush cutter Nouki BP-260 with Kawasaki TJ-53E engine and 26 mm bar. The engine features electronic ignition and a membrane carburetor that facilitates easy starting and provides a constant idle even in cold conditions. The bar has an anti-vibration system on the clutch bell support, significantly reducing operator fatigue. The...

KAW BACKPACK BRUSHER. TJ-53 E

Ref. BP-260-TJ53

Soon

View

PERTIGA TELESCOPICA PARA TIJERAS TBE-28, TBE-35, LONG 1.7-3 MTS

Chainsaws

Pole optional for the TBE-35 pruner. Work with complete safety. Reach higher with this accessory and access the most resistant branches without exerting unnecessary efforts or taking unnecessary risks.

LITHIUM BATTERY 2.5 AH CHAINSAW MBE-4

Ref. TBE-PE

Available

View

BATERIA LITIO ION, 2 AH, 21V, TIJERAS TBE-28, TBE-35 TIPO "QY"

Chainsaws

LITHIUM BATTERY 2.5 AH CHAINSAW MBE-4

Ref. TBE-2

Battery for TBE-35 pruning shears.

Available

View

Wood chippers

The BB100L model is capable of shredding all types of pruning waste, including the most fibrous ones such as palm leaves. Thanks to its wheels, maneuverability within the farms is no longer a problem. Both models incorporate a rotating and adjustable hopper, as well as electrical safety systems.

LONCIN 6.5 CV SHREDDER

Ref. BB100L

Available

View

Weed burner

Weed burner with hot air M60013-A suitable for small or medium-sized work surfaces such as pavements, sidewalks, fences, etc. Available for 10 Kg. liquid propane gas (LPG) cylinders (not included in the machine). The cart features a three-wheeled platform for easy maneuverability. In compliance with Directives 2006/42/EC and EU 2016/426.

LPG HERBAL BURNER WITH HOT AIR

Ref. M60013-A

Soon

View

QUEMADOR HIERBAS LPG - RUEDAS NEUMATICAS

Weed burner

Liquid Propane Gas (LPG) Weed Burner M60013-P suitable for small to medium-sized work surfaces such as pavements, sidewalks, fences, etc. Available for 15 or 20 Kg bottles. (not included in the machine). The cart features a detachable transport handle and pneumatic wheels. The application lance comes with a regulator, igniter, and five meters of hose....

LPG HERB BURNER - PNEUMATIC WHEELS

Ref. M60013-P

Soon

View

Weed burner

Liquid Propane Gas (LPG) Weed Burner M60013 suitable for small or medium-sized work surfaces such as pavements, sidewalks, fences, etc. Available for 15 or 20 Kg. bottles (not included in the machine). The cart features a fixed transport handle and solid wheels. The application lance comes with a regulator, igniter, and five meters of hose. In...

LPG HERB BURNER - SOLID WHEELS

Ref. M60013

Soon

View

Flow motor pumps

MARUYAMA 23 CC MOTOR PUMP, 1 "CONNECTION

Ref. MP2524S

Self-priming pump with Maruyama two-stroke engine. The best Japanese technology at your service. It has 1-inch inlet and outlet.

Available

View

Blade brushcutters

MARUYAMA 35 CC CHAINSAW

Ref. MCV3501S

Soon

View

Chainsaws

MARUYAMA 39 CC CHAINSAW, 14 "- 35 CM SWORD

Ref. MCV4000S

Soon

View

Chainsaws

MARUYAMA 50 CC CHAINSAW

Ref. MCV5100S

Soon

View

Blowers

MARUYAMA BL-3110 BLOWER

Ref. BL-3110SP

High-quality blower with the best Maruyama technology.

Soon

View

Blade brushcutters

MARUYAMA CHAINSAW 30 CC 14 "

Ref. MCV3101S

Available

View

CARRETILLA CADENAS MARUYAMA 550 KG BASCULANTE HIDRAUL. HONDA GX-200

Chain trucks

Tracked mini dumper by Maruyama with Honda GX-200 6.5 HP engine, ideal for gardening, agriculture, material transport, and construction work. Its dimensions, high load capacity, and maneuverability make it the perfect substitute for the traditional handcart. It features a transmission box with 4 speeds (2 forward and 2 reverse) and a tilting dump with...

MARUYAMA TRUCK TRUCK 550 KG HIDRAUL SWINGARM. HONDA GX-200

Ref. XG-550DMH

Available

View

Helical mower

Helicoidal lawnmower Masport Olympic 400 with Briggs Stratton engine of 4 HP The Olympic series is fully equipped and ready for professional-level performance. Its most relevant features include: Padded and ergonomic handles for more comfortable handling. Independent levers for traction and cutting. Centralized height adjustment system. Front...

MASPORT HELICOIDAL LAWNMOWER 406 MM CUT, 4 CV BRIGGS ENGINE

Ref. OLYMPIC400

Available

View

Helical mower

Cylinder Lawn Mower Masport Olympic 500 with Honda GX-160 5.5 HP Engine The Olympic series is fully equipped and ready for professional-level performance. Its most relevant features include: Padded and ergonomic handles for more comfortable handling. Independent levers for traction and cutting. Centralized height adjustment system. Front roller...

MASPORT HELICOIDAL LAWNMOWER OLYMPIC 500

Ref. OLYMPIC500

Available

View

Helical mower

Cylinder Lawn Mower Masport Olympic 660 with Honda GX-160 5.5 HP engine The Olympic series is fully equipped and ready for professional use. Its most relevant features include: Padded and ergonomic handles for more comfortable handling. Independent levers for traction and cutting. Centralized height adjustment system. Front roller segmented into...

MASPORT HELICOIDAL LAWNMOWER OLYMPIC 660

Ref. OLYMPIC660

Available

View

DESBROZADOR MITS. 33 CC, DIAM 26 MM , INCLUYE ARNES, DISCO Y CABEZAL

Brushcutters

MITS BRUSH CUTTER. 33 CC, DIAMETER 26 MM, INCLUDES HARNESS, DISC, AND HEAD

Ref. BC-600-TU33

Soon

View

Gasoline olive harvester rods

MITSUBISHI TU-26 PETROL HARVESTER

Ref. S-400-ZEUS

Olive shaker S-400-ZEUS with 2-stroke Mitsubishi TU-26 engine.

Soon

View

MOTOAZADA 3+1 VELOC CON MOTOR HONDA GP-200

Hoes for professional use

Professional tiller with all the power and reliability of Honda engines Professional machine with a Honda GP-200 6 HP engine and a cast iron gearbox with three speeds and clutch transmission. IMPORTANT: The machine does not include a furrower, potato harvester or pneumatic transport wheels.

MOTOAZADA 3 + 1 SPEED WITH HONDA GP-200 ENGINE

Ref. FLASH-300-GP

Available

View

MOTOAZADA 2 VELOC. ADELANTE Y 1 ATRAS MOTOR NOUKI 7 CV TRANSMISION ALUMINIO HS-001

Hoes

The best-selling tiller on the market with all the power of NOUKI engines Versatile machine with two speeds, featuring a Nouki 7.0 HP engine, easy to handle, with an aluminum transmission box and belt drive. IMPORTANT: The machine does not include a furrower, potato harvester or pneumatic transport wheels.

MOTOAZADA 3 SPEED. NOUKI ENGINE 6.5 CV

Ref. HS-001N

Available

View

Hoes

MOTOAZADA 3 SPEED. NOUKI ENGINE 6.5 CV

Ref. HS-650-A

Available

View

MOTOAZADA 3 VELOCIDADES C/MOTOR HONDA GX160

Hoes

IMPORTANT: Check item availability The best-selling tiller in the market with all the power of the GX series engines from Honda Versatile machine with two speeds featuring a Honda GX-160 5.5 HP engine, easy to handle, with an aluminum transmission case and belt drive. IMPORTANT: The machine does not include a furrower, potato harvester or pneumatic...

MOTOAZADA 3 SPEEDS W / HONDA GX160 ENGINE

Ref. HS-002

Available

View

Hoes

Mini-cultivator suitable for peat bogs. The machine comes standard with a Honda GX-25 engine with 1.1 HP power. It is worth noting, in addition to its small size, its transmission box made of aluminum with metal gearing.

MOTOAZADA C / HONDA GX-25

Ref. CA-250-H

Available

View

MOTOBOMBA 1.5" CON NOUKI 4 TIEMPOS 37 CC COLOR AZUL

Flow motor pumps

MOTOR PUMP 1.5 "WITH NOUKI 4 STROKE 37 CC

Ref. YPS-40

IMPORTANT: Check item availability

Available

View

MOTOBOMBA 1.5" CON NOUKI 4 TIEMPOS 37 CC

Flow motor pumps

MOTOR PUMP 1.5 "WITH NOUKI 4 STROKE 37 CC

Ref. NK-40

Self-priming pump with Nouki 1.8 HP motor. It has a 1.5-inch outlet and suction intake. Includes plastic connectors for hose connections and a bottom filter.

Available

View

MOTOBOMBA PRESION 2" 100 MTS YAMAHA MX400

Pressure pumps

MOTOR PUMP PRESSURE 2" 100 MTS YAMAHA MX400

Ref. SHP-50-MX

IMPORTANT: Check item availability Pressure pump with Yamaha MX-400 14 HP engine. It has a 2-inch output and suction inlet.

Available

View

MOTOBOMBA PRESION 55 MTS MOTOR NOUKI 6.5 HP.

Pressure pumps

MOTOR PUMP PRESSURE 55 MTS NOUKI ENGINE

Ref. HP-15NK

Pressure pump with 6.5 HP Nouki motor It has three outlets (2 outlets of 1 inch plus 1 outlet of 1.5 inches) and a 1.5-inch suction inlet.

Available

View

MOTOAZADA 1 VELOC, MOTOR ZONGSHEN 4.5 HP, ANCHO 650 MM

Hoes

MOTOR TILLER 1 SPEED, ZONGSHEN MOTOR 3 HP, WIDTH 350-550 MM

Ref. HS-650

Available

View

KIT MOTOAZADA HS-001, INCLUYE JGO FRESAS, KIT RUEDAS, ASURCADOR

Hoes

MOTOR TILLER KIT HS-001, INCLUDES MOTOR TILLER, WHEEL KIT WITH BUSHINGS AND ROUNDER

Ref. KIT HS-001

Available

View

Blades - mower

YAMAHA

MULCHING KIT FOR KAAZ LM5360HXAPRO

Ref. 71902218

Optional mulching kit.

Last units in stock

View

Multi cutter

MULTI-CUTTER MOTOR KAWASAKI TJ-27E (TJ027E-LS52)

Ref. JPS-240-K

Transmission with Kawasaki TJ-27E engine. The item is supplied without accessories.

Available

View

MOTOBOMBA NOUKI 2", MOTOR CH ATAQUE 3 TORNILLOS

Flow motor pumps

NOUKI 2 "MOTOR PUMP, 3 SCREW DRIVE CH MOTOR

Ref. WP-202BN

Self-priming pump with a 6.5 HP Nouki engine. It has a 2-inch suction and discharge outlet. Includes plastic fittings for connecting hoses and a bottom filter.

Available

View

CORTASETOS NOUKI 600 MM , 22.5 CC, ASA GIRATORIA

Hedge trimmer

Hedge trimmer with Nouki 1.3 HP engine featuring Japanese Ochiai transmission. It incorporates an internal transmission system that provides much smoother work development, significantly reducing the number of internal breaks in the event of blade blockage. The blades are made of chrome steel, sharpened and polished on all three cutting surfaces for a...

NOUKI HEDGE TRIMMER 600 MM, 22.5 CC, ROTATING HANDLE

Ref. NK-620

Available

View

Flow motor pumps

NOUKI MOTOR PUMP 5.5 DE 3 "

Ref. WP-203B

Self-priming pump with 6.5 HP Nouki motor. It has a 3-inch outlet and suction inlet. Includes plastic connectors for hose connections and a bottom filter.

Available

View

Brushcutters

Professional brush cutter Nouki XS-800 with Honda GX-50 engine and 28 mm bar. The engine features electronic ignition and a membrane carburetor that facilitates easy starting and provides a constant idle even in cold conditions. The bar has an anti-vibration system in the clutch bell support, significantly reducing operator fatigue. The drive shaft is...

NOUKI XS-800-GX50 BRUSHCUTTER

Ref. XS-800-GX50

Soon

View

Back battery harvester

OLYELLO 2B 260 G OLIVE HARVESTER

Ref. NK-260

Soon

View

Wood chippers

OPTIONAL WEDGE 4 PARTS GTL-8000-230V

Ref. MZLS0066528

Optional wedge accessory for splitting logs into 4 parts. To use this wedge, you need to disassemble the one installed in the original machine (straight wedge).

Available

View

PODADORA PERTIGA 18V 900W CON 2 BATERIAS LITIO 4 Ah Y CARGADOR. ESPADA 10"

Telescopic pruner

POLE SAW 18V 900W WITH 2 LITHIUM 4 Ah BATTERIES AND CHARGER. 10" BLADE

Ref. PE-18

Nouki PE-18 pole pruner with battery-powered electric motor.

Available

View

ESTACADORA DE POSTES CON 3 ADAPTADORES (45MM 55MM 73MM)

Augers

POST DRIVER OF 80 mm WITH ADAPTERS OF 45, 55 AND 73 mm.

Ref. CLE-80

Available

View

MOTOBOMBA PRESION 2" 100 MTS HONDA GX-390

Pressure pumps

PRESSURE MOTOR PUMP 2 "100 MTS HONDA GX-390

Ref. SHP-50

IMPORTANT: Check item availability Pressure pump with Honda GX-390 13 HP engine. It has a 2-inch output and suction inlet.

Available

View

MOTOBOMBA PRESION 2" 100 MTS NOUKI HS-713

Pressure pumps

PRESSURE MOTOR PUMP 2" 100 MTS NOUKI HS-713

Ref. SHP-50-NK

IMPORTANT: Check item availability Pressure pump with Nouki HS-713 13 HP engine. It has a 2-inch output and suction inlet.

Available

View

Pressure pumps

PRESSURE MOTOR PUMP 3 "GX-390 (80 METERS)

Ref. HP-30A

IMPORTANT: Check item availability Pressure pump with Honda engine GX-390 with 13 HP. It has 2 outlets of 1.5 inches each, plus 1 outlet of 2.5 inches, and a 3-inch suction inlet.

Available

View

Pressure pumps

PRESSURE MOTOR PUMP 55 MTS HONDA GX-160

Ref. HP-15A

Pressure pump with Honda GX-160 5.5 HP engine. It has three outlets (2 outlets of 1 inch each plus 1 outlet of 1.5 inches) and a 1.5-inch suction inlet.

Available

View

Pressure pumps

Lawnmower Kaaz LM-5360-HXA-PRO with Honda GXV-160 engine, 5.5 HP, mounted on an aluminum chassis. It features a collection bag with a capacity of 75 liters and a 2-speed gearbox with a cardan transmission.

PRESSURE MOTOR PUMP 75 MTS HONDA GX-160

Ref. 2HP-15A

Pressure pump with Honda GX-160 5.5 HP engine. It has three outlets (2 outlets of 1 inch plus 1 outlet of 1.5 inches) and a 1.5-inch suction inlet.

Available

View

Mower

KAAZ

PROFESSIONAL LAWNMOWER KAAZ SMALL WHEEL

Ref. LM5360HXA

Last units in stock

View

HIDROLIMPIADORA PROFESIONAL HONDA-GX-390 PRES. 275 BARES

Pressure washers

IMPORTANT: Check item availability Pressure washer with Honda GX-390 13 HP engine. Mounted on a steel frame with wheels for easy mobility and transportation of the unit. Comes standard with a Japanese Cat-Pump with a pressure of 275 bar. Includes a lance and a 10-meter hose as standard.

PROFESSIONAL PRESSURE CLEANER HONDA-GX-390 PRES. 275 BARS

Ref. HPW-275

Available

View

HIDROLIMPIADORA PROFESIONAL HONDA 250 BARES

Pressure washers

IMPORTANT: Check item availability Pressure washer with a Honda GX-390 13 HP engine. Mounted on a steel frame with wheels for easy mobility and transport of the unit. Comes standard with a Japanese Cat-Pump rated at 250 bar. Includes a lance and a 10-meter hose as standard equipment.

PROFESSIONAL PRESSURE CLEANER HONDA 250 BAR

Ref. HPW-250

Available

View

Pressure washers

HONDA

PROFESSIONAL PRESSURE WASHER, MX400, 275 BAR,

Ref. HPW-280

IMPORTANT: Check item availability Pressure washer HPW-280 for professional or intensive use with Honda GX-390 13 HP engine. .

Available

View

Blade brushcutters

PRUNING CHAINSAW MARUYAMA 30 CC 3/8 BP 40E

Ref. MCV3101TS

Last units in stock

View

Crimping machines

REBORDEADOR CON MOTOR MITSUBISHI TB-26

Ref. S-400-TB

Available

View

REMOLQUE TRACTOR CORTACESPED , CARGA 225 KG, RUEDAS 4.00-8, CAJA 102 X 82 X 29 CM

Lawn tractor

REMOLQUE TRACTOR CORTACESPED , CARGA 225 KG, RUEDAS 4.00-8, CAJA 103 X 82 X 29 CM

Ref. ATVR-250

Soon

View

Scarifier

With the GTV-500 scarifier, you can easily scarify and aerate your lawn in a comfortable and simple way. The machine is designed for professional use: Its system of 24 floating blades attached to 4 sub-axles ensures uniform and safe work, preventing damage to the rotor shaft in the presence of any obstacles it may encounter.

SCARIFIER WITH 61KG BRIGGS MOTOR

Ref. GTV-500

Available

View

Machinery to classify

SELF-PROPELLED STUMPER 12 HP

Ref. DR-011

Last units in stock

View

TRITURADORA 15 CV - CON ALIMENTADOR HIDRAULICO

Wood chippers

SHREDDER LONCIN 15 CV - ELECTRIC START

Ref. BB150L

Available

View

TRITURADORA LONCIN 15 CV - ARRANQUE ELECTRICO

Wood chippers

El modelo BB120L es capaz de triturar todo tipo de restos de poda incluso los más fibrosos como las hojas de palmera. Gracias a sus ruedas, la maniobrabilidad dentro de las fincas ya no es un problema. Incorpora a su chasis una bola de enganche para adaptarla a cualquier tipo de vehiculo. Ambos modelos incorporan una tolva giratoria orientable y...

SHREDDER LONCIN 15 CV - ELECTRIC START

Ref. BB120L

Available

View

GENERADOR MONOFASICO DIESEL, INSONORIZADO, AVR, POT MAX 6.500W

Generators

VG ENERGY

SINGLE-PHASE DIESEL GENERATOR, SOUNDPROOFED, AVR, POT MAX 6,500W

Ref. SCD-9000

Silent diesel generator with AVR system equipped with the 192-FE engine. Single-phase generator with the possibility of working in multiple applications: power generator, assistance in case of power grid failure, or as support in photovoltaic installations. Thanks to its direct injection diesel engine, it has very low consumption and easy maintenance....

Soon

View

Generators

SINGLE PHASE GENERATOR 3200W

Ref. SC-3500

3500W generator with a 7.5 HP SC-230 engine. It has 2 single-phase outputs. The generator is installed on a chassis with wheels and a transport handle.

Soon

View

GENERADOR MONOFASICO 7000W, MOTOR 14HP, ARRANQUE ELÉCTRICO

Generators

VG ENERGY

SINGLE PHASE GENERATOR 7000W

Ref. SC-8000

7000W generator with full power AP-190F 14 HP. It has 2 single-phase outputs. The generator is installed on a chassis with wheels and a transport handle.

Soon

View

Blowers

SOPLADOR MANUAL DE 26 CC

Ref. EB-260A

Soon

View

ASTILLADORA 2 POSICIONES 36 TONELADAS NOUKI 9 PS / 4000 RPM

Saw/chipper

SPLITTER 2 POSITIONS 36 TONS NOUKI 9 PS / 4000 RPM WITH TRAILER WITHOUT HOMOLOGATION

Ref. FOREST-360

Available

View

Blowers

ATOM

SUCTION KIT AT-855

Ref. AT-855-SR

Optional vacuum kit for AT-855 blower. The best solution to convert your blower into a vacuum.

Soon

View

CARRETILLA TRANSPORTADORA 350 KG. MOTOR HONDA GX-160

Chain trucks

TRACKED MINIDUMPER 350 KG. HONDA GX-160 ENGINE

Ref. TP-280

Tracked mini dumper with Honda GX-160 5.5 HP engine, ideal for gardening, agriculture, material transport, and construction work. Its dimensions, high load capacity, and maneuverability make it the perfect replacement for the traditional handcart. It features a transmission box with 3 speeds (2 forward and 1 reverse) and a tilting dump bed with a...

Soon

View

Wheel brush cutter

TREE PROTECTOR

Ref. 321861

The tree guard protects your trees during the clearing and weed elimination process. This accessory prevents the nylon string, while spinning at high revolutions, from reaching the tree trunk.

Available

View

CARRETILLA 200 LTS. 2R GRUPO LS-726 MOTOR 6.5 CV

Low cost series

VG SPRAYER

TRUCK 200 LTS. 2R GROUP LS-726 ENGINE 6.5 CV

Ref. 200-2R-726-HS

IMPORTANT: Check item availability Spraying equipment consisting of a 4-stroke engine Nouki with 7 HP and a pump LS-726 installed on a 200-liter cart with two wheels. The cart includes a spray gun and 10 meters of hose.

Available

View

CARRETILLA 300 KG, 6+2 VELOC. MOTOR LONCIN 6.5 HP

Chain trucks

Tracked mini dumper with a 6.5HP Loncin engine, ideal for gardening, agriculture, material transport, and construction work. Its dimensions, high load capacity, and maneuverability make it the perfect substitute for the traditional hand wheelbarrow. It features a transmission box with 8 speeds (6 forward and 2 reverse) and a tilting dump bed with a...

TRUCK 300 KG, 6 + 2 SPEED. LONCIN 6.5 HP ENGINE

Ref. E300L

Last units in stock

View

CARRETILLA 500 KG, 6+2 VELOC. MOTOR LONCIN 6.5 HP

Chain trucks

Tracked mini dumper with a 9 HP Loncin engine, ideal for gardening, agriculture, material transport, and construction work Its dimensions, high load capacity, and maneuverability make it the perfect replacement for the traditional hand wheelbarrow. It features a transmission box with 8 speeds (6 forward and 2 reverse) and a tilting dump bed with a...

TRUCK 500 KG, 6 + 2 SPEED. LONCIN 6.5 HP ENGINE

Ref. E500L

Available

View

CARRETILLA 500 KG, 6+2 VELOC ,LONCIN 9 HP,BASCULANTE HIDRAULICO, CAJA DUMPER

Chain trucks

TRUCK 500 KG, 6 + 2 SPEED. LONCIN 6.5 HP ENGINE

Ref. E500LHD

Last units in stock

View

CARRETILLA 500 KG, 6+2 VELOC ,LONCIN 9 HP,BASCULANTE HIDRAULICO, CAJA EXTENSIBLE

Chain trucks

TRUCK 500 KG, 6 + 2 SPEED. LONCIN 6.5 HP ENGINE

Ref. E500LH

Available

View

VAREADOR CON BATERIA 21 AMPERES TELESCOPICA 3,3 METROS

Back battery harvester

VAREADOR CON BATERIA 21 AMPERES TELESCOPICA 3,3 METROS

Ref. CORMORAN-V12BP

Available

View

Crimping machines

VAREADOR DE ACEITUNAS CON MOTOR HONDA GX-25

Ref. S-400-ZEUS-H

Available

View

DESBROZADORA RUEDAS MOTOR 52 CC CON FILTRO SNORKEL

Wheel brush cutter