Welding machine and generator MZW-7000AE of 6000 W. with Yamaha MZ-400 14 HP engine and electric start with voltage regulation by AVR.
Tool that can be used as a generator or as a welder.
The standard welding clamp accepts filler rods between 1.6 and 5 mm in diameter.
Its control panel is quite complete: it includes (among others) two single-phase Schuko outlets, a multifunction display (hour counter and voltmeter) and a low oil level alert.
Includes as standard a kit of wheels and carrying handle for easy transportation of the equipment
| ENGINE |
| FAMILY | MZ-400 |
| POWER | 14 HP - 402 cc |
| START | Manual / Electric |
| GAS TANK | 25 l. (with E-F indicator) |
| OIL TANK CAPACITY | 1.1 l. - SAE 10W30 |
| TECHNICAL SPECIFICATIONS (AC OUTPUT) |
| RATED VOLTAGE | 230 V. |
| CONSTANT SINGLE-PHASE OUTPUT | 5.5 kW |
| MAXIMUM SINGLE-PHASE OUTPUT | 6.0 kW |
| WELDING PARAMETERS |
| WELDING CURRENT OUTPUT | Between 50 - 200 A. |
| MAX. ELECTRODE DIAMETER | Accepts filler rods between 1.6 - 5 mm. |
| AUTONOMY |
| AT HALF LOAD | 9.5 hours. |
| AT FULL PERFORMANCE | 8.5 hours |
| CONTROL PANEL |
| Voltmeter - hour meter |
| 2 Single-phase outlets Schuko 16A type IP21 |
| Thermal circuit breaker |
| Low oil level sensor |
| BATTERY |
| TYPE | 12 V. - 18Ah. |
| FORMAT | 6-FM-18 |
| ACCESSORIES INCLUDED IN THE KIT |
| Ground cable and clamp cable |
| Chassis with transport wheels and foldable transport handle |
| WEIGHT |
| WEIGHT (Empty) | 97 Kg. |
| IMPORTANT NOTICE |
| The machine is supplied WITHOUT GASOLINE OR OIL in the engine |
